Russell Cascade System for Vibratory Separators

Shiral Amin
Shiral Amin
Senior Marketing Executive

Increase capacity and sieving efficiency with the Russell Cascade System

The Russell Cascade System helps you to accurately sieve your powders on a much larger screen area, removing the need to invest in more expensive, larger diameter machines to obtain a higher throughput.

Cascade-Finex-Separator-60.jpg

The Cascade System can be mounted into your existing grading sieves in the same manner as a standard sieve deck and can be fitted to most round separators of 48” and 60” diameters.

Russell-Cascade-System.jpg

The system is based on two screens of the same mesh size, mounted one above the other, the upper screen being slightly smaller in diameter. Material is fed to the upper screen and either passes through the mesh to be channeled to the discharge spout, or flows over the edge onto the screen below where it has another chance to be screened. Particles of the specified size passing though the lower screen are discharged in the normal manner. All oversized particles are discharged from the lower screen.

The two-phase separation process increases mesh area significantly, compared to a standard separator of the same diameter, raising capacity by up to 70 per cent.

The Cascade System is particularly effective where the particle size of the powder being screened is very close to the aperture size of the mesh. In this situation it is difficult for the particles to pass through the mesh and therefore having the extra mesh area increases the throughput significantly.

Recommended products

  • Finex Separator

    Finex Separator

    Vibratory separators for grading wet or dry materials up to five fractions in one ope…

    View
  • Eco Separator

    Eco Separator

    The most cost effective industrial sieve for grading wet or dry materials up to five …

    View

View more Products

Back to News & Events